Vol.61, No.2 / Aug. 2011


INDEX

2	Characteristic of Brittle Crack Arrest Steel Plate for Large Heat-input Welding for Large Container Ships
		Masahito KANEKO / Dr. Tokutaka TANI

6	Effect of Steel Toughness on Brittle Crack Arrest Behavior of T-weld Joint Structure Using Thick Plates
		Dr. Eiichi TAMURA / Dr. Tomokazu NAKAGAWA / Kazuyuki TSUTSUMI /   Naohiro FURUKAWA

11	Study of Strengthening Method of Strength by Air-cooled Type TMCP
		Satoshi SHIMOYAMA / Dr. Tokutaka TANI / Yoshinobu OMIYA

16	Mechanical Properties and Microstructural Control of TS 780MPa Steel Pipe with Low Yield Ratio and Excellent HAZ Toughness for Building Structures
		Tetsuo YAMAGUCHI / Hiroki IMAMURA / Toyoaki SHIWAKU / Soichi KAWABE

20	Design Technology for Column to Beam Connection of Circular Hollow Section and Square Hollow Section Steel Columns
		Masahiro MATSUSHITA / Takeshi TAKADA / Hiroki IMAMURA /  Toyoaki SHIWAKU / Yasufumi SASAK / Dr. Tsuyoshi TANAKA

28	Corrosion Prediction Method for Ni-added High-performance Weathering Steel
		Dr. Shinji SAKASHITA / Akihiko TATSUMI / Hiroki IMAMURA /   Yasushi FUCHITA / Masahiro MATSUSHITA

32	Effects of Ca Addition on Formation Behavior of TiN Particles and HAZ Toughness in Large Heat Input Welding
		Taku KATO / Shinsuke SATO / Dr. Hiroki OHTA / Toyoaki SHIWAKU

36	Cold-rolled Steel Sheets of 1,470MPa Grade with Superior Delayed Fracture Resistance Characteristics
		Kouji KASUYA / Michiharu NAKAYA / Michitaka TSUNEZAWA / Youichi MUKAI

41	Characteristics of Highly Formable 590-980MPa Grade Hot-dip Galvannealed Steel Sheets for Automobiles
		Dr. Yuichi FUTAMURA / Masaaki MIURA / Michitaka TSUNEZAWA

45	Galvannealed Steel Sheets for Induction Hardening
		Sae HAMAMOTO / Yukihiro UTSUMI / Tatsuya ASAI

49	Formability of TRIP Type Banitic Ferrite Steel Sheet
		Takayuki KIMURA

53	Roll-formed Lightweight Door Beam
		Noriyasu YOSHIOKA

57	Effect of Heating Rate during Continuous Annealing on Microstructure of Multiphase Cold Rolled Steel Sheet
		Tatsuya ASAI / Michiharu NAKAYA / Seiko HYODO

61	Influence of Substructures on Mechanical Properties of Low Carbon Tempered Martensite Steels
		Dr. Toshio MURAKAMI / Dr. Kenji SAITO

65	Evaluation of Delayed Fracture of High Strength Steel Sheets for Cyclic Corrosion Test
		Junichiro KINUGASA / Dr. Fumio YUSE / Michitaka TSUNEZAWA /  Youichi MUKAI

69	Cooling Behavior of Steel Sheets with Detoriorated Flatness on Hot-run Table
		Shusuke YANAGI / Akashi YAMAGUCHI / Toshiaki OKUNO /   Masanori KOBAYASHI

75	Coiling Temperature Control at Hot-run Table in Hot Strip Mill
		Takehiro TSUKUDA / Takanari SHIRASAKA / Dr. Yoshiharu NISHIDA /   Hiroyuki HASEGAWA / Masanori KOBAYASHI / Kodai DOI

80	Integrated Application Method for KOBEHONETSUTM Steel Sheet
		Dr. Yasuo HIRANO / Tetsuya IGARASHI / Haruyuki MATSUDA /  Makoto NISHIMURA

83	Effect of Surface Condition of Hot Dipped Zinc Coating on Corrosion Resistance of Chromate-free Coated Hot-dip Galvanized Steel Sheet
		Minoru CHIDA / Hiroshi IRIE

---

87	Papers on Advanced Technologies for Steel Plate and Sheet in R&D Kobe Steel Engineering Reports (Vol.51, No.1～Vol.61, No.1)