Dr.Series
Dr.Series is space-saving CIP equipment for R&D. It is used for researh and development of cutting-edge and new materials.
O2-Dr.HIP
Specifications
| Pt-Rh | Gr (Option) |
Mo (Option) |
|---|---|---|
| Ar, Ar+O2* | Ar,N2 | Ar |
| Φ50mm X 60mmL | Φ50mm X 75mmL | Φ75mm X 100mmL |
| 1500℃ | 2000℃ | 1500℃ |
| 200 MPa（2040 kgf/cm2） | ||
| 1315mm(W) X 1100mm(D) X 1300mm(H) | ||
| 1100 kg | ||
- *Gr: Graphite, Mo: Molybdenum
- *Ar+O2: Argon + Oxygen, The oxygen density is up to 20%.
Rapid-Cooling Dr. HIP
Specifications
Rapid-Cooling Dr. HIP allows for rapid cooling of a material by suspending it in the high temperature area with a wire and melting down the wire to drop it into the low temperature area. It is used for simulation of magmas in geological studies.
| Heater Type | Mo* |
|---|---|
| Pressure Medium | Ar |
| Dimensions of Pressure Vessel | Φ20mm X 20mmL |
| Maximum Temperature | 1500℃ |
| Temperature at falling point | Target value: 320℃ or less |
| Maximum Pressure | 196MPa(2000kgf/cm2) |
- *Mo: Molybdenum
Contact Us
You can reach us by clicking the inquiry button.